This is Bronze 21's custom Anarchie Road Sign. Here is what he had to say about it:
The sign is made of 3/4" birch plywood. The
sign
was painted white, then masking tape was applied over the sign to lay
out
the letters in pencil on the tape. Then an X-acto knife was used to cut
out
the letters, which were then painted with Testor's Model Master Black
paint.
The post is four pieces bond-o/glued/screwed together, with a piece
ground down for the cap (actual 4"x4" was too heavy for a wall
display).
The sign was screwed into a slot in the back and filled then painted.
Overall dimensions are about 30" by 36" by 4". It cost about $20.00 to make.